LUBRICATING PIPES

Sprinkler irrigation is the irrigation system which is formed by spraying the water needed by the plant at a certain pressure in the form of rain. Water is delivered to the sprinkler heads with pressure. Individual sprinkler system; water source, pump unit, main pipeline, vertical pipeline and sprinkler heads. Jeoplast Sprinkler Irrigation Pipes, produced according to the stands, are produced in 50-160 mm diameters, 5 and 6 meters in length using high density polyethylene (HDPE). It is very easy to connect with each other by connecting the rubber seal and the latches on the two sides.

• Since there is no water loss in the system, water is utilized to the maximum extent even in areas where irrigation water is low (3.5 l / sec).
• Batter topography can be done in bad places without causing erosion.
• Water; the soil is given in fine granules as in rain; In crop yield, it increases the quality by 20-50% compared to other irrigation methods and increases the quality. – Seed eliminates the inability of plant to fall above the soil due to the slider binding of the soil at the time of germination.
• It is the most ideal irrigation system in soil depth and (shallow) permeable soils.
• Salts, especially salt, which are carried by wind-carried salt water to plants, dust and harmful insects can be washed by sprinkler.
• It is possible to control water by sprinkler irrigation; ground water is the most suitable irrigation method in areas with high (drainage) problem.
• Since there is no need for field trenches, the cultivation area increases and agricultural operations can be carried out easily.
• Vegetables, citrus fruits, vineyards and other fruits can be protected from frost and heat.
• Flammable artificial fertilizers; Along with irrigation water can be given to plants without the need for labor.